<
>

National Jet Hangar

Hangar and Office Space

This project consisted of the design and construction of a hangar for servicing aircraft, as well as an associated two-storey office at the rear of the building. The hangar has a column-free span of 78 metres, providing 4,700 square metres of clear space for the movement of aircraft and maintenance equipment.

The light-weight steel frame, which was fabricated by Ahrens in its local steel workshop, was pre-assembled on the ground, before being lifted and secured into place with two cranes.

In addition, we also completed the installation of the roof sheeting and the internal fit-out of the hangar and offices.